Item # BrazeIt A-38T
A general purpose brazing alloy providing good flow and ductility. Forms good fillets and is an economical alternative to other cadmium-free alloys. Brazeit A-38T is used for brazing ferrous metals, copper, copper alloys, nickel, nickel alloys and combinations of these metals. The tin content provides good wetting on many difficult wet metals such as stainless steel and tungsten carbide. This alloy, being free of Zn or Cd, preferred for long heating cycles and is suitable for use in a controlled atmosphere brazing without flux. The greatest use of this alloy is during furnace brazing, although it is also suitable for other brazing procedures.
|Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz)||
275 in @ 0.031 diameter
30 in @ 0.093 diameter
65 in @ 0.062 diameter
Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.
1330 to 1550 ºF
721 to 843 ºC
|Electrical Conductivity||18 % IACS|
|Electrical Resistivity||9.50 Micro ohm-cm|
Typical applications are the brazing of ferrous, nonferrous and dissimilar metals and alloys with close joint clearances.
Similar melt temperatures to cadmium alloys Sil. 30 and Sil. 35. Suitable for ferrous and non ferrous.
Standard forms of Brazeit A-38T are brazing wire and brazing preforms.
It is essential that adequate ventilation be provided so that personnel will not inhale gases and fumes while brazing. The operation and maintenance of brazing equipment or facility should conform to the provisions of American National Standard (ANSI) Z49.1, "Safety in Welding and Cutting". For more complete information refer to the Material Safety Data Sheet for Brazeit A-38T.
Request A Quote
Please complete the fields below and hit continue to fill out our web form and attach supporting documentation. We will contact you as soon as possible.