Item # BrazeIt-5
This phos-copper brazing alloy delivers moderate liquidity and improved gap filling compared to Brazeit #0. The 5% silver content provides good economy when compared with Brazeit #15.
Brazeit 5 is used for the brazing of copper and copper alloys, brass, and bronze. It can also be used on silver, tungsten, and molybdenum. It is primarily used for the joining of copper-to-copper. Brazeit 5 should not be used when brazing ferrous metals or copper alloys containing more than 10% nickel because of phosphorus embrittlement due to reaction with iron or nickel. Brazeit 5 has good flow and wetting properties on copper, brass, and bronze. Its melting characteristics are such that on the low end of its brazing temperature range it has “sluggish” flow characteristics which enable it to fill gaps better, making it ideal for loose-fitting joints. On the other hand, when brazing at the high end of its brazing temperature range, it is very fluid, making ideal for tight-fitting joints requiring deep penetration.
|Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz)||
1120 in @ 0.062 diameter
4500 in @ 0.031 diameter
490 in @ 0.093 diameter
Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.
1325 to 1500 ºF
718 to 816 ºC
|Electrical Conductivity||9.6 % IACS|
|Electrical Resistivity||18.1 Micro ohm-cm|
The phosphorus content of Brazeit 5 acts as a fluxing agent and no flux is necessary when brazing copper-to-copper joints. However, when used with a copper alloy or one of the other brazeable metals, a brazing flux must be used to promote wetting, bonding, and flow throughout the joint. The flow point of Brazeit 5 is 1325 ºF (718 ºC).
Used when gap clearance range is .003 to .006". Ideal for larger copper pipe sizes.
Standard forms of Brazeit 5 are brazing wire and brazing preforms.
The operation and maintenance of brazing equipment or facility should conform to the provision of American National Standard (ANSI) Z49.1, "Safety in Welding and Cutting." For more complete information, refer to the Material Safety Data Sheet for Brazeit 5.
Request A Quote
Please complete the fields below and hit continue to fill out our web form and attach supporting documentation. We will contact you as soon as possible.