Item # BrazeIt 35
An economical alternative to Brazeit 45, this alloy offers good flow and is well suited for application where fit-up is less than ideal.
Brazeit 35 is an alloy with a melting range suitable for brazing steel, stainless steel, copper, copper alloys, nickel, nickel alloys or combinations of these metals. Brazeit 35 is free-flowing and suited for general purpose work. Its broader melting range is helpful where clearances are not uniform. During melting, Brazeit 35 passes from the solid state to a mushy or plastic state and progressively to a liquid. If heated slowly through this plastic state (1125-1295 ºF), the liquid portion may flow from the solid portion. This causes a separation of the alloy into a low-temperature melting (fluid) portion and a high-temperature melting (solid) portion. This phenomenon is called liquation. The high-temperature melting portion will melt only above the normal brazing temperature of Brazeit 35. For this reason, Brazeit 35 should be heated rapidly through the melting range.
|Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz)||
270 in @ 0.031 diameter
30 in @ 0.093 diameter
65 in @ 0.062 diameter
Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.
1295 to 1550 ºF
702 to 843 ºC
|Electrical Conductivity||27.5 % IACS|
|Electrical Resistivity||6.26 Micro ohm-cm|
Typical applications are the joining of ferrous, nonferrous and dissimilar metals and alloys close joint clearances.
Broader melt range than Sil. 45. Suitable for larger gap clearance and easier filleting.
Standard forms of Brazeit 35 are wire, strip and preforms.
Brazeit 35 contains cadmium and therefore upon heating may produce toxic fumes. It is essential that adequate ventilation be provided so that personnel will not inhale gases and fumes while brazing. The operation and maintenance of brazing equipment or facility should conform to the provisions of American National Standard (ANSI) Z49.1, "Safety in Welding and Cutting." For more complete information, refer to the Material Safety Data Sheet on Brazeit 35.
Request A Quote
Please complete the fields below and hit continue to fill out our web form and attach supporting documentation. We will contact you as soon as possible.