Toll Free: 1-800-367-6024 |

Bellman Melcor

Item # BrazeIt 30

Brazeit 30 is historically a modification of Brazeit 35 with a further reduction in silver content resulting in a higher melting point and a longer melting range (185 ºF). Brazeit 30 is used for brazing steel, stainless steel, copper, copper alloys, nickel, nickel alloys or combinations of these metals. It is similar to Brazeit 35 in performance although it contains less silver. Its broader melting range is helpful where clearances are not uniform. During melting, Brazeit 30 passes from the solid state to mushy or a plastic state and progressively to a liquid. If heated slowly through this plastic state (1125-1310 ºF) the liquid portion may flow from the solid portion. This causes a separation of the alloy into a low temperature melting (fluid) portion and a high temperature melting (solid) portion. This phenomenon is called liquation. The high temperature melting portion will melt only above the normal brazing temperature of Brazeit 30. For this reason, Brazeit 30 should be heated rapidly through the melting range.

Melting Pt. 1125 ºF
607 ºC
Flow Pt. 1310 ºF
710 ºC
MBT1 1550
AWS A5.8 BAg-2a
Preform Options Brazing Discs
Brazing Rings
Brazing Washers
Resale Options2 Brazing Rod
Brazing Strip
Brazing Wire
Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz) 275 in; 0.031 diameter
30 in; 0.093 diameter
65 in; 0.062 diameter

Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.

Solidus 1125 ºF
607 ºC
Liquidus 1310 ºF
710 ºC
Brazing Range 1310 to 1550 ºF
710 to 843 ºC
Specific Gravity 8.76
Density 4.79 T.oz./
Electrical Conductivity 31 % IACS
Electrical Resistivity 5.5 Micro ohm-cm
Color Light Yellow

Typical applications are the joining of ferrous, nonferrous and dissimilar metals and alloys close joint clearances.

Less silver than Sil. 35 at the expense of increased melt temperature and range.

Standard forms of Brazeit 30 are wire, strip and preforms.

Brazeit 30 contains cadmium and therefore upon heating may produce toxic fumes. It is essential that adequate ventilation be provided so that personnel will not inhale gases and fumes while brazing. The operation and maintenance of brazing equipment or facility should conform to the provisions of American National Standard (ANSI) Z49.1, "Safety in Welding and Cutting." For more complete information refer to the Material Safety Data sheet for Brazeit 30.

Request A Quote

Please complete the fields below and hit continue to fill out our web form and attach supporting documentation. We will contact you as soon as possible.

7575 West 183rd Street
Tinley Park, Illinois 60477

Toll Free: 1-800-367-6024 | Fax: 1-888-BRAZE-IT (272-9348) |