Toll Free: 1-800-367-6024 | sales@bellmanmelcor.com

Bellman Melcor

Item # BrazeIt-2

Combination of low silver with high phosphorous creates very good fluidity in this phos-copper brazing alloy. While not quite as liquid as Brazeit #0, tight fit-up is recommended.

Brazeit 2 is used for the brazing of copper and copper alloys, brass and bronze. It can also be used on silver, tungsten and molybdenum. It is primarily used for the joining of copper-to-copper on vibration free joints. It is very effective for joining tight fitting copper pipe and tubing. Brazeit 2 should not be used when brazing ferrous metals or copper alloys containing more than 10% nickel because of phosphorus embrittlement due to reactions with iron or nickel. Brazeit 2 is extremely fluid at brazing temperatures and will penetrate a joint with very little clearance. Best results are obtained with clearances of 0.001″ – 0.003″. Melting of Brazeit 2 is virtually complete at 1300ºF (704ºC). Best results are obtained when brazing slightly above this temperature.

Melting Pt. 1190 ºF
645 ºC
Flow Pt. 1300 ºF
705 ºC
MBT1 1475
AWS A5.8 BCuP-6
ASME BCuP-6
QQ-B-650 BCuP-6
Preform Options Brazing Rings
Custom Designs
Cut-Offs
Resale Options2 Brazing Rods
Brazing Wire
Paste
Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz) 1140 in @ 0.062 diameter
4570 in @ 0.031 diameter
500 in @ 0.093 diameter

Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.

Solidus 1190 ºF
643 ºC
Liquidus 1450 ºF
788 ºC
Brazing Range 1300 to 1450 ºF
643 to 788 ºC
Specific Gravity 8.00
Density 4.21 T.oz./cu.in. 0.289 lb./cu.in
Electrical Conductivity 5.5 % IACS
Electrical Resistivity 31.5 Micro ohm-cm
Color Light Copper

The phosphorus content of Brazeit 2 acts as a fluxing agent and no flux is necessary when brazing copper joints. However, when used with a copper alloy or one of the other brazeable metals, a brazing flux must be used to promote wetting, bonding, and flow throughout the joint. The flow point of Brazeit 2 is 1300 ºF (704 ºC).

Silver addition lowers solidus temperature, not as fluid as Sil. 0, gap clearance .001" to .003".

Standard forms of Brazeit 2 are brazing wire and brazing preforms

Request A Quote

Please complete the fields below and hit continue to fill out our web form and attach supporting documentation. We will contact you as soon as possible.

7575 West 183rd Street
Tinley Park, Illinois 60477

Toll Free: 1-800-367-6024 | Fax: 1-888-BRAZE-IT (272-9348) | sales@bellmanmelcor.com