|
| CDA
#773 (Nickel-Silver) |
|
| Nominal
Composition: |
|
|
| Copper |
|
48% |
| Nickel |
|
10% |
| Zinc |
|
Balance |
| Physical
Constants: |
|
|
| Solidus |
|
1665°F
(907°C) |
| Liquidus |
|
1680°F
(916°C) |
| Recommended
Braze Temp |
|
1740°F
|
| Specific
Gravity |
|
8.47 |
| Density
(lb/cu in) |
|
.302 |
| Electrical
Conductivity (%IACS) |
|
5.5 |
| Electrical
Resistivity (Microhm-cm) |
|
31.4 |
DESCRIPTION:
CDA #773 is a high temperature, high strength
corrosion resistant alloy that is primarily used for the joining
of steel to steel or carbide to steel. Due to the high flow point,
we recommend the use of Engelhard Black Flux. Because of the zinc
content, it is recommended that the heat cycle is kept to a minimum
to prevent any vaporizing of the zinc.
| SPECIFICATIONS: |
|
| AWS
|
RBCuZn-D |
| MIL |
R-19631 |
| FED.
SPEC. |
QQ-B-650 |
| AVAILABLE
FORMS: |
| Preform
Options : |
|
| Rings
|
Cut-Offs |
| Discs
|
Spheres |
| Custom
Design |
|
| Resale
Options : |
|
| Wire
|
Paste |
| Rod
|
Powder |
| Spooled
Material |
|
|
|
